Dell C9000 series, Reference Manual

Page: 1927 / 2286

Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the E-Series.
Usage Information By default, the
aaa authorization commands
command configures the system to
check both EXEC level and CONFIGURATION level commands. Use the command
no
aaa authorization config-commands
to enable only EXEC-level command
checking.
aaa authorization exec
Set parameters that restrict (or permit) a user’s access to EXEC-level commands.
C9000 Series
Syntax
aaa authorization exec { name | default} {local || || if-
authenticated || none}
To disable authorization checking for EXEC level commands, use the
no aaa
authorization exec
command.
Parameters
name Define a name for the list of authorization methods.
default Define the default list of authorization methods.
local Use the authorization parameters on the system to perform
authorization.
Use the protocol to perform authorization.
none Enter the keyword
none
to apply no authorization.
Defaults none
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Security 1927