traceroute
View a packet’s path to a specific device.
C9000 Series
Syntax
traceroute {
host
|
vrf instance
|
ip-address
|
ipv6-address
}
Parameters
host
Enter the name of device.
vrf instance
(Optional) E-Series Only: Enter the keyword
vrf
then the VRF
Instance name.
ip-address
Enter the IP address of the device in dotted decimal format.
ipv6-address
Enter the IPv6 address, in the x:x:x:x::x format, to which you are
testing connectivity.
NOTE:
The :: notation specifies successive hexadecimal
fields of zeros.
Defaults
• Timeout =
5 seconds
• Probe count =
3
• 30 hops max
• 40 byte packet size
• UDP port =
33434
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.9(0.0)
Introduced on the C9010.
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.12.0
Introduced on the S4810.
Control and Monitoring
190
Summary of Contents for C9000 series
Page 1: ...Dell Networking Command Line Reference Guide for the C9000 Series Version 9 10 0 0 ...
Page 394: ...deny 14551 666 Dell Access Control Lists ACL 394 ...
Page 877: ...algorithm FIPS Cryptography 877 ...
Page 1297: ...Total 5 0 Total 5 active route s using 952 bytes IPv6 Basics 1297 ...