Dell C9000 series, Reference Manual, Page: 1889 / 2286

distance
Assign a weight (for prioritization) to all routes in the RIP routing table or to a specific route. Lower weights
(“administrative distance”) are preferred.
C9000 Series
Syntax
distance weight [ ip-address mask [ prefix-name ]]
To return to the default values, use the
no distance weight [ ip-address mask ]
command.
Parameters
weight Enter a number from 1 to 255 for the weight (for prioritization).
The default is
120 .
ip-address (OPTIONAL) Enter the IP address, in dotted decimal format
(A.B.C.D), of the host or network to receive the new distance
metric.
mask If you enter an IP address, also enter a mask for that IP address,
in either dotted decimal format or /prefix format (/x).
prefix-name (OPTIONAL) Enter a configured prefix list name.
Defaults weight = 120
Command Modes ROUTER RIP
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Routing Information Protocol (RIP) 1889