Dell C9000 series, Reference Manual

Page: 1845 / 2286

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
Usage Information If the specified color-map does not exist, the Diffserv Manager (DSM) creates a color
map and sets all the DSCP values to green (low drop precedence).
The default setting for each DSCP value (0-63) is green (low drop precedence). This
command allows setting the number of specific DSCP values to yellow or red.
Important Points to Remember
• All DSCP values that are not specified as yellow or red are colored green.
• A DSCP value cannot be in both the yellow and red lists. Setting the red or yellow
list with any DSCP value that is already in the other list results in an error and no
update to that list is made.
• Each color map can only have one list of DSCP values for each color; any DSCP
values previously listed for that color that are not in the new DSCP list are colored
green.
Example
Dell(conf-dscp-color-map)# dscp yellow 9,10,11,13,15,16
Related
Commands
qos dscp-color-map — configures the DSCP color map
qos dscp-color-policy — configures a DSCP color policy
qos dscp-color-map
Configure the DSCP color map.
C9000 Series
Syntax
qos dscp-color-map map-name
To remove a color map, use the no
qos dscp-color-map
map-name command.
Parameters
map-name Enter the name of the DSCP color map. The map name can
have a maximum of 32 characters.
Defaults None
Quality of Service (QoS) 1845