Dell C9000 series, Reference Manual

Page: 1783 / 2286

switchport mode private-vlan
Set PVLAN mode of the selected port.
C9000 Series
Syntax
[no] switchport mode private-vlan {host | promiscuous | trunk}
To remove PVLAN mode from the selected port, use the
no switchport mode
private-vlan
command.
Parameters
host Enter the keyword
host
to configure the selected port or port
channel as an isolated interface in a PVLAN.
promiscuous Enter the keyword
promiscuous
to configure the selected port
or port channel as a promiscuous interface.
trunk Enter the keyword
trunk
to configure the selected port or port
channel as a trunk port in a PVLAN.
Defaults Disabled.
Command Modes INTERFACE
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
Usage Information The assignment of the various PVLAN port types to port and port channel (LAG)
interfaces is shown in the following example.
Example
Dell#conf
Dell(conf)#interface TenGigabitEthernet 2/1
Private VLAN (PVLAN) 1783