Dell C9000 series, Reference Manual

Page: 1721 / 2286

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Example
Dell(conf-pe-5)# show config
!
pe provision 5
stack-unit 4 type C1048P
Dell(conf)#pe 255
Dell(conf-pe-255)#show config
!
pe provision 255
cascade interface TenGigabitEthernet 6/0
stack-unit 1 type C1048P
show ecid
Display the E-Channel identifier (ECID) information for all or any specified interfaces.
C9000 Series
Syntax
show ecid {interface [ interface ] | pe pe-id stack—unit unit-
number }
Parameters
interface interface
Enter the
interface
keyword, and specify one of the following
interface types:
• For a PE Gigabit Ethernet interface, enter the keyword
peGigE
. You must specify a pe-id/stack-unit/port-id for
the interface.
• For a port channel interface, enter the keyword
port-
channel
• For a VLAN interface, enter the keyword
vlan
then a
number from 1 to 4094.
.
pe pe-id Enter the keyword
pe
keyword and specify a port extender ID
number. Range is from 0 to 255.
stack-unit unit-
number
Enter the keyword
stack-unit
and the unit number. Range is
from 0 to 7.
Port Extenders (PE) 1721