Dell C9000 series, Reference Manual

Page: 1716 / 2286

Example
Dell#connect pe 254
Login: peadmin
Password:
DellPE>
feature extended-bridge
Enable 802.1BR (bridge port extender) support on the switch.
C9000 Series
Syntax
[no] feature extended-bridge
To disable 802.1BR support on the switch, use the
no feature extended-bridge
command.
Default None
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
9.9(0.0) Introduced on the C9010.
Usage Information This command enables support for the 802.1 bridge PE (BR) on the switch. Enabling the
PE feature allows you to provision the PE. The
no feature extended-bridge
command disables bridge PE support and deprovisions a PE. When you use this
command in the Configuration Terminal Batch mode, you can enable the support for
the bridge PE connected in a Dual-Homing setup.
You can use the
show feature
command to check whether the extended-bridge
feature has been enabled as shown in the following example.
Example
Dell>show feature
Feature State
------- -----
Port Extenders (PE) 1716