Dell C9000 series, Reference Manual

Page: 1595 / 2286

Usage Information By default, no interfaces are
passive . Routing updates are sent to all interfaces on which
the routing protocol is enabled.
If you disable the sending of routing updates on an interface, the particular address
prefix continues to be advertised to other interfaces, and updates from other routers on
that interface continue to be received and processed.
OSPFv3 for IPv6 routing information is not sent or received through the specified router
interface. The specified interface address appears as a stub network in the OSPFv3 for
IPv6 domain.
redistribute
Redistribute into OSPFv3.
C9000 Series
Syntax
redistribute {bgp as number }{connected | static}[metric metric-
value | metric-type type-value ] [route-map map-name ] [tag tag-
value ]
To disable redistribution, use the
no redistribute {connected | static}
command.
Parameters
bgp as number
Enter the keyword
bgp
then the autonomous system number.
The range is from 1 to 65535.
connected
Enter the keyword
connected
to redistribute routes from
physically connected interfaces.
static
Enter the keyword
static
to redistribute manually configured
routes.
metric metric-
value
Enter the keyword
metric
then the metric value.
The range is from 0 to 16777214.
The default is 20 .
metric-type type-
value
(OPTIONAL) Enter the keywords
metric-type
then the OSPFv3
link state type of 1 or 2 for default routes. The values are:
• 1 for a type 1 external route
Open Shortest Path First (OSPFv2 and OSPFv3) 1595