Dell C9000 series, Reference Manual

Page: 1436 / 2286

To disable the multiple spanning tree protocol on the interface, use the
no spanning-
tree
command.
Parameters
spanning-tree Enter the keywords
spanning-tree
to enable the MSTP on the
interface.
Defaults Enable.
Command Modes INTERFACE
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.0 Introduced on the E-Series.
spanning-tree msti
Configure multiple spanning tree instance cost and priority for an interface.
C9000 Series
Syntax
spanning-tree msti instance {cost cost | priority priority }
Parameters
msti instance Enter the keyword
msti
and the MST instance number. The
range is from zero (0) to 63.
cost cost (OPTIONAL) Enter the keyword
cost
then the port cost value.
The range is from 1 to 200000. The defaults are:
• 10-Gigabit Ethernet interface = 2000
Multiple Spanning Tree Protocol (MSTP) 1436