Dell C9000 series, Reference Manual

Page: 1412 / 2286

Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
7.5.1.0 Added option for SA upper limit and the
description
option.
6.2.1.1 Introduced
Usage Information The
connect-source
option is used to supply a source IP address for the TCP
connection. When an interface is specified using the
connect-source
option, the
primary configured address on the interface is used.
If the total number of SA messages received from the peer is already larger than the
limit when this command is applied, those SA messages continue to be accepted. To
enforce the limit in such situation, use the
clear ip msdp peer
command to reset
the peer.
Related
Commands
ip msdp sa-limit — configures the MSDP SA Limit.
clear ip msdp peer — clears the MSDP peer.
show ip msdp — displays the MSDP information.
ip msdp redistribute
Filter local PIM SA entries in the SA cache. SAs which the ACL denies time out and are not refreshed. Until
they time out, they continue to reside in the MSDP SA cache.
C9000 Series
Syntax
ip msdp redistribute [list acl-name ]
Parameters
list acl-name lEnter the name of an extended ACL that contains permitted
SAs. If you do not use this option, all local entries are blocked.
Defaults Not configured.
Command Modes CONFIGURATION
Multicast Source Discovery Protocol (MSDP) 1412