Dell C9000 series, Reference Manual

Page: 1407 / 2286

Version Description
7.4.1.0 Introduced
Related
Commands show ip msdp sa-cache rejected-sa
ip msdp default-peer
Define a default peer from which to accept all source-active (SA) messages.
C9000 Series
Syntax
ip msdp default-peer peer address [list name ]
To remove the default peer, use the
no ip msdp default-peer { peer address }
list name
command.
Parameters
peer address Enter the peer address in a dotted decimal format (A.B.C.D.)
list name Enter the keywords
list name
and specify a standard access
list that contains the RP address that should be treated as the
default peer. If no access list is specified, then all SAs from the
peer are accepted.
Defaults Not configured.
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added the
list
option and removed the
prefix-list
option.
7.4.1.0 Introduced
Multicast Source Discovery Protocol (MSDP) 1407