Dell C9000 series, Reference Manual

Page: 1403 / 2286

Parameters
peer address Enter the peer address in a dotted decimal format (A.B.C.D.)
Defaults Not configured.
Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
6.2.1.1 Introduced
clear ip msdp sa-cache
Clears the entire source-active cache, the source-active entries of a particular multicast group, rejected, or
local source-active entries.
C9000 Series
Syntax
clear ip msdp sa-cache [ group-address | rejected-sa | local]
Parameters
group-address Enter the group IP address in dotted decimal format (A.B.C.D.).
rejected-sa Enter the keywords
rejected-sa
to clear the cache source-
active entries that are rejected because the RPF check failed, an
SA filter or limit is configured, the RP or MSDP peer is
unreachable, or because of a format error.
local Enter the keyword
local
to clear out local PIM advertised
entries. It applies the redistribute filter (if present) while adding
the local PIM SA entries to the SA cache.
Defaults Without any options, this command clears the entire source-active cache.
Command Modes EXEC Privilege
Multicast Source Discovery Protocol (MSDP) 1403