Dell C9000 series, Reference Manual

Page: 1350 / 2286

• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Related
Commands show lacp — displays the LACP configuration.
debug lacp
Debug LACP (configuration, events, and so on).
C9000 Series
Syntax
debug lacp {config | events | pdu [ interface-type [in | out]]}
To disable LACP debugging, use the
no debug {config | events | pdu
[ interface-type [in | out]]}
command.
Parameters
config (OPTIONAL) Enter the keyword
config
to debug the LACP
configuration.
events (OPTIONAL) Enter the keyword
events
to debug the LACP
event information.
pdu (OPTIONAL) Enter the keyword
pdu
to debug the LACP Protocol
Data Unit information.
interface-type in |
out
(OPTIONAL) Enter the following keywords and slot/port or
number information:
Link Aggregation Control Protocol (LACP) 1350