Dell C9000 series, Reference Manual

Page: 1322 / 2286

Version Description
6.2.1.1 Introduced on the E-Series.
Example
Dell# show cam mac linecard 1 port-set 0
PVlanId Mac Address Region Interface
1 00:01:02:03:04:09 DYNAMIC Fo 2/0
0 74:86:7a:ff:6f:1c LOCAL_DA 00001
1 00:11:22:33:44:55 STATIC Fo 2/8
1 00:01:02:03:04:07 DYNAMIC Fo 2/0
1 00:01:02:03:04:08 DYNAMIC Fo 2/0
0 ff:ff:ff:ff:ff:ff STATIC 00001
1 00:01:02:03:04:05 DYNAMIC Fo 2/0
1 00:01:02:03:04:06 DYNAMIC Fo 2/0
show mac-address-table
Display the MAC address table.
C9000 Series
Syntax
show mac-address-table [address mac-address | interface interface
| vlan vlan-id ] [aging-time] [dynamic | static] [count [vlan vlan-
id ] [interface interface-type [ slot [ /port ]]]]
Parameters
address mac-
address
(OPTIONAL) Enter the keyword
address
then a MAC address in
the nn:nn:nn:nn:nn:nn format to display information on that
MAC address.
dynamic (OPTIONAL) Enter the keyword
dynamic
to display only those
MAC addresses the switch dynamically learns. Optionally, you
can also add one of these combinations:
address/ mac-
address
,
interface/ interface
, or
vlan vlan-id
.
static (OPTIONAL) Enter the keyword
static
to display only those
MAC addresses specifically configured on the switch. Optionally,
you can also add one of these combinations:
address/ mac-
address
,
interface/ interface
, or
vlan vlan-id
.
aging-time Enter the keyword
aging-time
to display only aging-time
information.
interface interface (OPTIONAL) Enter the keyword
interface
then the interface
type, slot and port information:
• For a Port Channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
Layer 2 1322