Dell C9000 series, Reference Manual

Page: 124 / 2286

• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information
CAUTION: Use this command only when you are working directly with a
technical support representative to troubleshoot a problem. Do not use this
command unless a technical support representative instructs you to do so.
show cpu-traffic-stats
View CPU traffic statistics.
C9000 Series
Syntax
show cpu-traffic-stats [cp | rp | linecard { slot-id | pe ]
Parameters
number Specify an interface number. The number of interfaces range
from 1 to 1568.
all Enter the keyword
all
to display traffic statistics on all the
interfaces.
cp Enter the keyword
cp
to display traffic statistics on the Control
Processor CPU.
rp Enter the keyword
rp
to display traffic statistics on the Route
Processor CPU.
pe Enter the keyword
pe
to display traffic statistics on the Port
Extender.
Defaults Display CPU traffic statistics for all switch CPUs (Control Processor and Route
Processor).
Command Modes EXEC
Control and Monitoring 124