Dell C9000 series, Reference Manual

Page: 1232 / 2286

Column
Heading
Description
ospf 100 If routing protocols (OSPF, RIP) are configured and routes are
advertised, then information on those routes is displayed.
Total 1388
active... Displays the number of active and non-active routes and the
memory usage of those routes. If there are no routes configured
in the system, this line does not appear.
Example
Dell>show ip route summary
Route Source Active Routes Non-active Routes
connected 17 0
static 3 0
ospf 100 1368 2
Intra-area: 762 Inter-area: 1 External-1: 600 External-2: 5
Total 1388 2
Total 1388 active route(s) using 222440 bytes
Total 2 non-active route(s) using 128 bytes
Dell>
Related
Commands
show ip route — displays information about the routes found in the switch.
show ip traffic
View IP traffic statistics related to switch CPUs, including ICMP, UDP, TCP and ARP counters.
C9000 Series
Syntax
show ip traffic {all | cp | rp}
Parameters
all (OPTIONAL) Enter the keyword
all
to view IP traffic statistics
from all processors.
cp (OPTIONAL) Enter the keyword
cp
to view only IP traffic
statistics from the Control Processor.
rp (OPTIONAL) Enter the keyword
rp
to view only IP traffic
statistics from the Route Processor.
Default View IP traffic statistics from all processors.
Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
IPv4 Routing 1232