Dell C9000 series, Reference Manual

Page: 1068 / 2286

graceful-restart t2
Configure the wait time for the graceful restart timer T2 that a restarting router uses as the wait time for each
database to synchronize.
C9000 Series
Syntax
graceful-restart t2 {level-1 | level-2} seconds
To return to the default, use the
no graceful-restart t2
command.
Parameters
level-1, level-2 Enter the keywords
level-1
or
level-2
to identify the
database instance type to which the wait interval applies.
seconds Enter the
gracefule-restart t2
time in seconds. The range
is from 5 to 120 seconds. The default is 30 seconds .
Defaults 30 seconds
Command Modes ROUTER ISIS
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.3.1.0 Introduced on the E-Series.
Intermediate System to Intermediate System (IS-IS) 1068