Dell Aurora R6, Service Manual

Page: 76 / 164

Removing the solid-state drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your
computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance .
CAUTION: Solid-state drives are fragile. Exercise care when handling
the solid-state drive.
CAUTION: To avoid data loss, do not remove the solid-state drive
while the computer is in sleep or on state.
Prerequisites
1 Remove the left-side cover .
2 Follow the procedure from step 1 to step 4 in " Removing the power-supply
unit ".
3 Remove the graphics card .
Procedure
1 Locate the solid-state drive slot on the system board. For more information,
see "
System-board components ".
2 Remove the screw that secures the solid-state drive to the system board.
76