Dell Aurora R6, Service Manual

Page: 67 / 164

Replacing the processor-cooling
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your
computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance .
Procedure
1 Slide the radiator and fan assembly into the radiator and fan cage.
2 Align the screw holes on the radiator and fan assembly with the screw holes
on the radiator and fan cage.
3 Replace the screws that secure the radiator and fan assembly to the
radiator and fan cage.
4 Align the screw holes on the processor cooler with the screw holes on the
system board.
5 In sequential order (indicated on the processor cooler), tighten the captive
screws that secure the processor cooler to the system board.
6 Connect the processor-cooling assembly cables to the system board.
7 Follow the procedure from step 10 to step 11 in " Replacing the power-supply
unit ".
8 Replace the screws that secure the radiator and fan assembly to the
chassis.
Post-requisites
1 Replace the top cover .
2 Replace the right-side cover .
3 Replace the left-side cover .
67