Dell Aurora R6, Service Manual, Page: 106 / 164

Replacing the top-chassis fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your
computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance .
Procedure
1 Align the holes on the top-chassis fan with the holes on the top-chassis fan
bracket.
2 Insert the ends of the rubber grommets through the holes at each corner of
the fan.
3 Align the grommets in the fan with the holes at each corner of the top-
chassis fan bracket and pull through until they snap into place.
4 Route the top-chassis fan cable through the routing guide on the bracket.
5 Align the tabs on the top-chassis fan with the slots on the chassis and slide
the fan until it snaps into position.
6 Replace the screw that secures the top-chassis fan to the chassis.
7 Connect the top-chassis fan cable to the system board.
Post-requisites
1 Follow the procedure from step 10 to step 11 in " Replacing the power-supply
unit ".
2 Replace the left-side cover .
106