Replacing the graphics card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance
.
Procedure
1
Align the graphics-card assembly with the slot on the riser cage.
2
Place the graphics-card assembly in the slot and press down firmly. Ensure that
the graphics-card assembly is seated in the slot.
3
Rotate the card retention bracket towards the riser cage until it snaps into place.
4
Route the graphics-card power cables through the routing guide on the riser
cage.
5
Align and press down the riser cage until the riser card slides into the riser-card
slot on the chassis.
6
Replace the screws that secure the riser cage to the chassis.
Post-requisites
Replace the
side panel
.
37
Проконсультироваться
и
купить
данное
оборудование
вы
можете
в
компании
«
АНД
-
Системс
»
адрес
: 125480,
г
.
Москва
,
ул
.
Туристская
,
д
.33/1; site: https://andpro.ru
тел
: +7 (495) 545-4870 email: [email protected]
При
обращении
используйте
промокод
AND-PDF
и
получите
скидку
.
