Dell Alienware m15, Service Manual

Page: 65 / 106

Replacing the power-adapter port
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your computer . After working inside your computer, follow the instructions
in After working inside your computer . For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance .
Procedure
1 Connect the power-adapter port cable to the system board.
2 Adhere the tape that secures the power-adapter port cable to the system board.
3 Place the power-adapter port into the slot, and adhere the power-adapter port on the palm-rest assembly.
4 Clip and rotate the power-adapter port bracket onto the power-adapter port.
5 Replace the screw (M2x3) that secures the power-adapter port bracket to the system board and palm-rest assembly.
Post-requisites
1 Follow the procedure from step 2 to step 7 in Replacing the heat sink .
2 Replace the base cover .
65