Dell Alienware 17 R4 Service Manual Download Page 20

Page: 20 / 133

Removing the hard drive

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before working inside your computer

. After working inside your

computer, follow the instructions in

After working inside your computer

For more safety best practices, see the Regulatory Compliance home

page at

www.dell.com/regulatory_compliance

CAUTION: Hard drives are fragile. Exercise care when handling the hard

drive.

CAUTION: To avoid data loss, do not remove the hard drive while the

computer is in sleep or on state.

Prerequisites

Remove the

base cover

Procedure

Using the pull-tab, disconnect the hard-drive cable from the system board.

2 Remove the hard-drive cable from the routing guides on the computer base.
3 Remove the four screws (M2.5x5) that secure the hard-drive assembly to the

computer base.

Summary of Contents for Alienware 17 R4






































































































































Search results

Summary of Contents for Alienware 17 R4

Reviews:

Related manuals for Alienware 17 R4

Brands by name

Popular brands

Dell Alienware 17 R4, Service Manual

Search results

Summary of Contents for Alienware 17 R4

Reviews:

Related manuals for Alienware 17 R4

Brands by name

Popular brands