Dell Alienware 13 R3, Service Manual, Page: 21 / 78

Removing the rear-I/O cover
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in
Before working inside your computer . After working inside your computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance .
Topics:
• Prerequisites
• Procedure
Prerequisites
Remove the base cover .
Procedure
1. Remove the two screws (M2.5x6L) that secure the rear-I/O cover to the palm-rest assembly.
2. Using a plastic scribe, gently release the tabs that secure rear-I/O cover to the computer base.
3. Slide and remove the rear-I/O cover from the computer base.
21