Dell Alienware 13 R3 Page 17 Service Manual Download

Page: 17 / 78

Removing the solid-state drive

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in

Before working inside your computer

. After working inside your computer, follow the instructions in

After working inside your

computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance

CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.

CAUTION: To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.

Topics:

•

Prerequisites

•

Procedure

Prerequisites

Remove the

base cover

Procedure

1. Remove the screw (M2x3) that secures the solid-state drive to the computer base.
2. Lift and slide the solid-state drive from the solid-state drive slot.

Summary of Contents for Alienware 13 R3















































































Search results

Summary of Contents for Alienware 13 R3

Reviews:

Related manuals for Alienware 13 R3

Brands by name

Popular brands

Dell Alienware 13 R3, Service Manual

Search results

Summary of Contents for Alienware 13 R3

Reviews:

Related manuals for Alienware 13 R3

Brands by name

Popular brands