Installing the base cover
1. Align the base cover with the screw holders on the computer.
2. Press the edges of the cover until it clicks into place.
3. Tighten the ( 8 screws - M2.5L8; 3 screws - M2L2; 2 screws- M2L2) screws to secure the base cover to the computer.
4. Flip the computer over.
5. Open the display and connect the optical drive connector to the system board.
6. Tighten the five M2L5 screws to secure the base cover to the palm rest.
7. Install the:
a.
b.
c.
After working inside your computer
.
Hard drive
Removing the hard drive assembly
Before working inside your computer
.
2. Remove the:
a.
b.
c.
Disassembly and reassembly
21
