Dell 3555-E3A, User Manual

Page: 75 / 202

5. When the initial setup is complete, the display returns to the Operator Panel main screen.
To check your configuration at any time, go to Configuration > Initial System Setup on the Operator
Panel. On the Management GUI, go to Library.
Initial configuration and customization
After the physical installation and initial setup by using the Operator Panel is completed, an
administrator can log on to the Management GUI to complete the library configuration and configuration
of any additional features.
Upon the first login with the user role: admin and password: adm001 , The Initial Configuration Wizard
guides you through basic configuration settings.
The library has many features to customize it for your organization. Go to “Locating Management
functions” on page 63 to customize your library with these features.
v Enabling or disabling the I/O station.
v Naming the library with the Manage Logical Library function.
v Creating or managing Logical Libraries. See “Library sharing” on page 17 for information.
v Enabling and configuring SNMP network management.
v Setting up email event notification.
v Setting up encryption.
v Configuring date and time.
v Enabling or disabling Library Auto Clean. See “Methods of cleaning drives” on page 69.
Labeling and loading tape cartridges
The library can power on without cartridges, but needs cartridges before it can complete data read and
write operations, or any tests or operations that transfer cartridges.
Bar code labels are highly recommended in production environments to improve inventory time in the
library and ease cartridge-handling processes outside the library. See “Labeling tape cartridges” on page
145.
The I/O station
If the I/O station is enabled, you can use it to load cartridges into the library. Press the magazine button
for less than 3 seconds and after the button LED is flashing fast, pull out the I/O station.
Installing
53