background image

Dell Secure Mobile Access 6200/7200   Getting Started Guide

53

• A suitably rated and approved branch circuit breaker 

shall be provided as part of the building installation. 
Follow local code when purchasing materials or 
components. 

• Consideration must be given to the connection of the 

equipment to the supply circuit. Appropriate 
consideration of equipment nameplate ratings must be 
used when addressing this concern. Do not overload the 
circuit. 

• Reliable grounding of rack-mounted equipment must be 

maintained. Particular attention must be given to 
power supply connections other than direct connections 
to the branch circuits, such as power strips. 

• As shipped from the factory this Dell SonicWALL product 

includes two power supplies for redundant AC power 
and added reliability.

• To disconnect AC power, both power cords must be 

removed.

• The included power cord(s) are approved for use only in 

specific countries or regions. Before using a power 
cord, verify that it is rated and approved for use in your 
location. 

• Minimum power cord rating for European Union (CE): 

Certified power supply cord not lighter than light PVC 
sheathed flexible cord according to IEC 60227, 
designation, or H05 VV-F or H05 VVH2-F2, and rated for 
at least 3G 0.75 mm².

• Never remove or install a power supply with the AC 

power cord attached to the power supply being 
removed or installed. 

• Thumbscrews should be tightened with a tool after 

both installation and subsequent access to the rear of 
the product. 

• Before replacing the fan unit, carefully read and follow 

the instructions provided with the unit. 

• When using a Fiber Optic Small-Form Pluggable (SFP) 

module, ensure it is IEC 60825 certified.

Lithium battery warning

The Lithium Battery used in the Dell SMA Internet security 
appliance may not be replaced by the user. The appliance must 
be returned to a Dell authorized service center for 
replacement with the same or equivalent type recommended 
by the manufacturer. If, for any reason, the battery or Dell 
SMA Internet security appliance must be disposed of, do so 
following the battery manufacturer's instructions.

Warning of Potential Hazard from Fan

Summary of Contents for 1RK30-0AF































































Reviews: