Dell 1510 - Vostro - Core 2 Duo 2.1 GHz Service Manual Download Page 61

Page: 61 / 116

Template Last Updated - 2/7/2007

Power Button and Multimedia Button Pads

DELL CONFIDENTIAL – PRELIMINARY 9/4/09 - FOR PROOF ONLY

Power Button and Multimedia
Button Pads

Removing the Power Button and Multimedia
Button Pads

CAUTION:

Before you begin any of the procedures in this section, follow the

safety instructions that shipped with your computer.

NOTICE:

The power button and multimedia button pads should be removed and

reinstalled as a single unit.

Follow the procedures in "Before Working on Your Computer" on page 29.

Remove the hinge cover (see "Removing the Hinge Cover" on page 53).

Remove the keyboard (see "Removing the Keyboard" on page 57).

Disconnect the multimedia-button pad cable from the system board.

Remove the M2 x 3-mm screw that secures the power button pad to the
palm rest.

Remove the M2 x 3-mm screw that secures the multimedia button pad to
the palm rest.

Slide the power button pad to the left and lift the power button and
multimedia button pads out of the computer in one movement.

Disconnect the power-button pad cable from the connector at the bottom
of the multimedia button pad.

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz





















































































































Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands

Dell 1510 - Vostro - Core 2 Duo 2.1 GHz, Service Manual

Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands