Dell 1350CNW User Manual Download Page 39

Page: 39 / 328

Connecting Your Printer

Connect the other end of the cable into a USB port of the computer.

NOTICE:

Do not connect the printer USB cable to the USB port available on the

keyboard.

Network Connection

To connect the printer to a network:

Ensure that the printer, computer and any other connected devices have

been turned off and all cables have been disconnected.

Connect the Ethernet cable.

NOTE:

Connect the Ethernet cable, only if you need to setup a wired connection.

To connect the printer to the network, connect one end of an Ethernet cable

into the Ethernet port on the back of the printer, and the other end to a LAN

port or LAN hub.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for 1350CNW









































































































































































































































































































































Search results

Summary of Contents for 1350CNW

Reviews:

Brands by name

Popular brands

Dell 1350CNW, User Manual

Search results

Summary of Contents for 1350CNW

Reviews:

Brands by name

Popular brands