manualshive.com logo in svg

Dell 1350CNW, User Manual

Share
Download
Dell 1350CNW User Manual Download Page 266

262

Maintaining Your Printer

Storing Print Media

To avoid potential paper feeding problems and uneven print quality, you need 

to consider the following points:

• To achieve the best possible print quality, store print media in an 

environment where the temperature is approximately 21°C (70°F) and the 

relative humidity is 40%.

• Store cartons of print media on a pallet or shelf, rather than directly on the 

floor.

• If you store individual packages of print media out of the original carton, 

ensure that they rest on a flat surface so the edges do not buckle or curl.

• Do not place anything on top of the print media packages.

Storing Consumables

Store consumables in their original packaging until you need to use them. Do 

not store consumables in:

• Temperatures greater than 40°C (104°F).
• An environment with extreme changes in humidity or temperature.
• Direct sunlight.
• Dusty  places.

Print 

media

Multiple Up

 in the 

Layout

 tab of the printer 

driver

The printer prints two or more pages on one 

side of a sheet. The available numbers that 

each printer driver can print one sheet of paper 

are as follows:

• Windows Printer Driver: 2, 4, 8, 16, or 32 

pages

• Macintosh Printer Driver: 2, 4, 6, 9, or 16 

pages

Combined with the duplex setting, 

Multiple 

Up

 allows you to print up to 64 pages on one 

sheet of paper. (32 images on the front and 32 

on the back)

Supply

Setting

Function

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for 1350CNW









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands