manualshive.com logo in svg

Dell 1350CNW, User Manual

Share
Download
Dell 1350CNW User Manual Download Page 212

208

Understanding the Tool Box Menus

Non-Dell Toner

Purpose:

To use toner cartridge of another manufacturer.

 

NOTE: 

Using non-Dell-brand toner cartridges may make some printer features 

unusable, reduce print quality and decrease the reliability of your printer. Dell 

recommends only new Dell-brand toner cartridges for your printer. Dell does not 

provide warranty coverage for problems caused by using accessories, parts, or 

components not supplied by Dell.

 

NOTE: 

Before you use toner cartridge of another manufacturer, be sure to restart 

the printer.

Values:

BTR Refresh Mode

Purpose:

To execute counter measures for curling/separating discharge of the paper.

Values:

Start

Click to initialize the system parameters.

Non-Dell 

Toner

Off*

Does not use toner cartridge of another manufacturer.

On

Use toner cartridge of another manufacturer.

Apply New Settings

After you complete the settings, press the 

Apply New 

Settings

 button to apply the changes.

Restart printer to apply new 

settings

Press the 

Restart printer to apply new settings

 button 

to apply the changes.

BTR Refresh 

Mode

Off

*

Does not automatically execute counter measures for 

curling/separating discharge of the paper.

On

Automatically executes counter measures for curling/

separating discharge of the paper.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for 1350CNW









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands