manualshive.com logo in svg

Dell 1350CNW, User Manual

Share
Download
Dell 1350CNW User Manual Download Page 137

Dell Printer Configuration Web Tool

133

Reset Defaults

Purpose:

To initialize NVM (non-volatile memory) for system parameters. After 

executing this function and rebooting the printer, all the menu parameters, 

except the parameters for the network, are reset to their default values.

Values:

Non-Dell Toner

Purpose:

To use toner cartridge of another manufacturer.

 

NOTE: 

Using non-Dell-brand toner cartridges may make some printer features 

unusable, reduce print quality and decrease the reliability of your printer. Dell 

recommends only new Dell-brand toner cartridges for your printer. Dell does not 

provide warranty coverage for problems caused by using accessories, parts, or 

components not supplied by Dell.

 

NOTE: 

Before you use toner cartridge of another manufacturer, be sure to restart 

the printer.

Adjust Altitude

Purpose:

To specify the altitude of the location where the printer is installed. 

Ghost

Click 

Start

 to print a chart to check for ghost printing.

4Colors

Click 

Start

 to print bands of yellow, magenta, cyan, and black with 

varying density.

Alignment

Click 

Start

 to print a chart, and then check for proper alignment of 

the print image on the paper.

Drum Refresh

Click 

Start

 to print a chart to check the light fatigue of the drum 

cartridge.

Reset Defaults 

and restart 

printer.

Click 

Start

 to initialize the system parameters.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for 1350CNW









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands