Figure 31. Removing an expansion card from expansion card riser 2 or 3
1
expansion card
2
expansion card latch
3
expansion card riser
4
power connector
5
expansion card connector
Next steps
1
Install an expansion card into the expansion card riser.
2
Follow the procedure listed in the After working inside your appliance section.
Installing an expansion card into the expansion card riser 2 or 3
Prerequisites
1
Follow the safety guidelines listed in the Safety instructions section.
2
Follow the procedure listed in the Before working inside your appliance section.
Steps
1
Unpack the expansion card and prepare it for installation.
For instructions, see the documentation accompanying the card.
2
Lift the expansion card latch and remove the filler bracket.
3
Holding the card by its edges, position the card so that the connector on the expansion card aligns with the expansion card connector
on the riser.
4
Insert the card-edge connector firmly into the expansion card connector until the card is fully seated.
5
Press the touch points to open the expansion card locking tabs.
74
Installing and removing components
