Dell EMC VxRail G Series, Owner'S Manual, Page: 14 / 22

Appliance power and cooling information
The following tables contain specifications for the appliance power consumption and
dissipation. Calculations based on these tables are intended to provide maximum
power and heat dissipation. EMC provides a power and weight calculator at
http://
powercalculator.EMC.com . Use this calculator to refine the power and heat values in
the table below to more-closely match the specific appliance hardware configuration.
Ensure that the appliance installation site meets the requirements for your
configuration.
Table 4 Appliance power consumption and dissipation—Hybrid Nodes
Specification VxRail G410
Power supplies 2 × 1600 W high efficiency redundant PSUs
AC line voltage 220V AC, 50/60Hz
Power consumption
(operating maximum) 1486 KVA
Heat dissipation 5070.232 BTU/hr
Maximum inrush current 55 A per power supply unit up to one-quarter
of AC cycle
Table 5 Appliance power consumption and dissipation—All-flash Nodes
Specification VxRail G410F
Power supplies 2 × 1600 W high efficiency redundant PSUs
AC line voltage 220V AC, 50/60Hz
Power consumption
(operating maximum) 1500 KVA
Heat dissipation (fully loaded appliance) 5118 BTU/hr
Maximum inrush current 55 A per power supply unit up to one-quarter of
AC cycle
Appliance dimensions and weight
Table 6 Appliance dimensions and weight
Dimension Appliance Appliance with rails
Form factor 2U chassis 2U chassis
Height 3.44 in (8.74 cm) 2.0 U (with or without bezel)
Depth 31.1 in (79 cm) 32.1 in (81.53 cm)
Width 17.48 in (43.4 cm) without
cabinet latch brackets 18.99 in (48.23 cm) with cabinet latch
brackets
Technical Specifications
14 Dell EMC VxRail G Series Appliances 4.5 Owner's Manual