one on SP-A and the other on SP-B. Each server shares different file systems. IP multi-tenancy is
optional and can be configured depending on the use case.
Procedure
1
Log on to the Dell EMC Unity storage array where you want to create a NAS server.
2
Select
Storage
>
File
>
NAS Servers
.
3
Click
+
to create a new server.
4
Using the wizard, perform the following:
a
Type the name, tenant, storage pool, and SP.
b
Select the Ethernet port (physical link), IPv4/IPv6 information, and VLAN.
c
Select the NFS, SMP, or FTP protocols.
d
Select the NIS and DNS servers.
5
Create a second NAS server with similar characteristics on the other SP.
Creating a file system
Specify the file system size, storage type, the NAS server, and other characteristics, such as snapshots
and replication.
Procedure
1
Log on to the Dell EMC Unity storage array where you want to create a file system.
2
Select
Storage
>
File
>
File Systems
.
3
Click
+
to create a new file system.
4
Using the wizard, perform the following:
a
Set the NAS protocol and server.
b
Type the name and description of the file system.
c
Set the pool, capacity, and tiering policy.
d
Type the initial share information.
e
Set the snapshot and replication options.
Creating a tenant
Create a tenant by specifying the name, optional UUID, and adding VLANs.
Before you begin
67
|
Managing storage resources
