Dell EMC Vblock Systems 350 Administration Manual Download Page 169 | Manualshive

Page: 169 / 181

background image

•

ELM with VMware vSphere is used to integrate VMware vCenter Management for five Converged
Systems in the same data center. ELM with VMware vSphere 6.5U1 with five Converged
Systems is an operational, fault and management domain. Exceeding this limit is not supported.
Each Converged System may have multiple VMware vCenter servers. In this scenario, compute,
network, and storage resources are not shared between the two or more discrete VMware
vCenter servers located in each Converged System.

•

ELM with VMware vSphere is used to integrate VMware vCenter Management for five Converged
Systems in separate data centers. Exceeding this limit is not supported. In this scenario,
compute, network and storage resources are not shared between the two or more discrete
VMware vCenter servers located in separate datacenters. This configuration is very similar to a
configuration for two Converged Systems in the same data center, but introduces network
latency.

Dell EMC recommends AMP-2S with an SMP/VMP configuration to simplify VMware vSphere 6.5U1
management with more than two Converged Systems or VMware vCenter servers.

Backup and restore Converged Systems with VMware ELM
(vSphere 6.5U1)

The VMware vCenter Server 6.5 supports file-based and image-based backups. Backup/Restore jobs can
be initiated using GUI or API interfaces.Dell EMC recommends using VCSA Native

file-based backup

to

backup/restore PSC vCenter Server and recommends following the procedure to recover failed PSC’s/
VC’s. All PSCs/VCs in a SSO domain must be backed-up

A recent backup must be available locally in the recovery site. VCSA Installer of same version/build
should be available for recovery operation. The failed PSC must be powered off and removed from
vCenter inventory.

Backing up the PSC using the backup option

Follow this task to initiate the backup.

Procedure

1

Login to the VCSA management interface.

2

From the

Summary

tab, click the

Backup

button on the right pane.

3

Select the protocol used to backup.

4

Provide backup location.

5

Click

finish

to initiate the backup.

Restoring a failed PSC

A VMware vCenter server connected to a failed PSC must be repointed to surviving PSC to restore
vCenter services.

169

|

Configuring VMware Enhanced Linked Mode (vSphere 6.5U1)

«
...
167
168
169
170
171
...
»

Summary of Contents for Vblock Systems 350






















































































































































































Reviews:

No comments

Related manuals for Vblock Systems 350

Brand: Elkron Pages: 12

Brand: Wavemaster Pages: 4

Brand: La Crosse Technology Pages: 2

Brand: Yamaha Pages: 7

Brand: Community Pages: 60

Brand: HTD Pages: 2

Brand: APART Pages: 2

Brand: Bticino Pages: 3

Brand: Air Liquide Pages: 16

Brand: Monacor Pages: 2

Brand: Jensen Pages: 10

Medialon MAS Pro Dante D

Brand: 7th Sense Pages: 2

Brand: Q Acoustics Pages: 44

ARK COLUMN Series

Brand: DAD Pages: 56

Brand: DAPAudio Pages: 20

Brand: Fenton Pages: 12

MultiPRO Series

Brand: Paton Pages: 44

Brand: K&F Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands