SCv2000/SCv2020 Storage System Technical
Specifications
Technical Specifications
The technical specifications for the SCv2000/SCv2020 storage systems are shown in the following tables.
Drives
SAS hard drives
SCv2000
: Up to 12 3.5-inch SAS hot-swappable hard drives (6.0 Gbps)
SCv2020
: Up to 24 2.5-inch SAS hot-swappable hard drives (6.0 Gbps)
NOTE:
A minimum of seven drives is required for every class of drive (RI SSD, WI SSD,
15k, 10k and 7k) in the system.
Storage Controllers
Storage controllers
Up to two hot-swappable storage controllers with the following IO options:
•
Two 16 Gbps Fibre Channel ports
•
Four 8 Gbps Fibre Channel ports
•
Two 10 Gbps iSCSI ports
•
Four 1 Gbps iSCSI ports
•
Four 12 Gbps SAS ports
Storage Connectivity
Configurations
Storage Center supports up to 168 drives in one redundant-path SAS chain
•
The SCv2000 supports up to 13 SC100 expansion enclosures or 6 SC120 expansion enclosures.
•
The SCv2020 supports up to 12 SC100 expansion enclosures or 6 SC120 expansion enclosures.
Redundant Array of Independent Disks (RAID)
Controller
Two hot-swappable storage controllers.
Management
RAID management using Dell Storage Manager.
Back-Panel Port Connectors (per Storage Controller)
Fibre Channel, iSCSI, or SAS
connectors
Connection to a Fibre Channel fabric, iSCSI network, or a direct connection to servers with SAS HBAs
Ethernet connectors
MGMT
: 1 Gbps or 10 Gbps embedded Ethernet/iSCSI port used for Storage Center management
REPL
: 1 Gbps or 10 Gbps embedded iSCSI port used for replication to another Storage Center
SAS connectors
6 Gbps SAS connectors for SAS port redundancy and additional expansion enclosures
NOTE:
SAS connectors are SFF-8086/SFF-8088 compliant.
USB connector
One USB 3.0 connector used for Storage Center updates
Serial connector
NOTE:
Not for customer use.
4
34
SCv2000/SCv2020 Storage System Technical Specifications
