Dell EMC Precision 7750 Service Manual Download Page 48 | Manualshive

Page: 48 / 103

background image

Steps

1. Remove the (M2.5x2.5) screw that secures the power button assembly with fingerprint reader cable bracket to the power button

board.

2. Remove the power button assembly with fingerprint reader cable bracket from the power button board.
3. Disconnect the power button assembly with fingerprint reader cable from the power button board.
4. Disconnect the power button board cable from the connector on the system board.
5. Peel the power button board cable from the palmrest.
6. Remove the two (M2x3) screws that secure the power button board to the computer.
7. Remove the power button board with the power button board cable from the computer.
8. Disconnect the power button board cable from the power button board.

Installing the power button assembly with fingerprint
reader

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The figure indicates the location of the power button assembly with fingerprint reader and provides a visual representation of the
installation procedure.

48

Desmontaje y reensamblaje

«
...
46
47
48
49
50
...
»

Summary of Contents for Precision 7750








































































































Reviews:

No comments

Related manuals for Precision 7750

Brand: NEC Pages: 34

VERSA 6220 - SERVICE

Brand: NEC Pages: 199

ShieldPRO FC-N21S

Brand: NEC Pages: 20

Brand: Panasonic Pages: 12

Brand: Panasonic Pages: 28

Brand: Panasonic Pages: 48

Brand: Panasonic Pages: 28

Brand: Panasonic Pages: 55

Brand: Panasonic Pages: 21

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 12

Brand: Panasonic Pages: 16

Brand: Panasonic Pages: 80

Brand: XMG Pages: 23

Brand: Navilock Pages: 2

VERSA LX AGP VIDEO -

Brand: NEC Pages: 14

Toughbook CF-50Y8KNUDM

Brand: Panasonic Pages: 40

Brand: Dell Pages: 88

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands