Figure 6 Sliding the X400 capacity cube into the rack
X400 capacity cube cover replacement
Removing the X400 capacity cube cover
Before you begin
1. Follow the
.
2.
Extend the X400 capacity cube from the rack
.
Procedure
1. Using a flat or a Phillips head screwdriver, rotate the latch release lock counter clockwise to
the unlocked position.
2. Lift the latch till the system cover slides back and the tabs on the system cover disengage
from the guide slots on the system.
3. Hold the cover on both sides, and lift the cover away from the system.
Common procedures
16
PowerProtect X400 Appliance Customer Replaceable Unit (CRU) Procedures
