Figure 38 Information tag (back side) on the back of a sled with the iDRAC MAC address
On each X400 capacity cube, the iDRAC MAC address is on the back side of the
information tag located at the front of the X400 capacity cube, as shown in the
following figure. The information tag is located in the front of the X400 capacity
cube under slot 11.
Figure 39 X400 capacity cube information tag (back side) with the iDRAC MAC address
2. Set up a fixed IP address for each iDRAC, using its MAC address, in your DHCP
server.
Optionally, set a hostname for those IP addresses in your DNS.
3. Using the new iDRAC IP address, log in to iDRAC with the following credentials
and change the root account password.
Configure iDRAC
PowerProtect X400 Appliance Hardware Configuration and Installation Guide
55
