Figure 3 Front view of the left and right control panels
Table 3 Control panel
Item
Indicator or button
Icon
Description
1
Left control panel
-
The power-on indicator and system identification LED for sleds 1
and 2 are located on the left control panel.
on page 18
shows the location of sleds 1 and 2 on the back of the X400
platform cube.
2
Right control panel
-
The power-on indicator and system identification LED for sleds 3
and 4 are located on the right control panel.
on page 18
shows the location of sleds 3 and 4 on the back of the X400
platform cube.
3
Power-on indicator or system state
indicator or power button for sleds 1
and 3
Press the power button to turn the sled on or off.
The power-on indicator turns amber when a critical system event
occurs.
4
System identification button for
sleds 1 and 3
Press the system ID button:
l
To locate a particular sled within the enclosure.
l
To turn the system ID on or off.
5
Power-on indicator or system state
indicator or power button for sleds 2
and 4
Press the power button to turn the sled on or off.
The power-on indicator turns amber when a critical system event
occurs.
6
System identification button for
sleds 2 and 4
Press the system ID button:
l
To locate a particular sled within the enclosure.
When the system ID button is pressed, the system
identification indicator
on the back of the sled lights up.
(see
on page 19)
l
To turn the system ID on or off.
Hardware specifications
16
PowerProtect X400 Appliance Hardware Configuration and Installation Guide
