Figure 25. Installing the motherboard bridge module
Next steps
1.
2.
Install the cable M.2 riser board.
3.
Install the mini PERC card module.
4.
5.
6.
7. Follow the procedure listed in
After working inside your system
.
Motherboard interposer board
Removing the motherboard interposer board
Prerequisites
1. Follow the safety guidelines listed in the
.
2. Follow the procedure listed in the
Before working inside your system
3.
4.
5.
6.
7.
Remove the cable M.2 riser board.
8.
9.
Remove the motherboard bridge module.
Installing and removing system components
59
