Figure 24. Installing a cooling fan
Next steps
1. Follow the procedure listed in
After working inside the system
2. Check the management software to see if the fan is rotating at the optimal speed.
Removing the cooling fan cage
Prerequisites
WARNING:
Do not attempt to operate the system without the cooling fans.
WARNING:
The cooling fan spins for some time after the system is powered down. Allow the fan to stop
spinning before removing it from the system.
NOTE:
Observe the routing of the cables when removing them from the system. Route these cables properly when you
replace them to prevent the cables from being pinched or crimped.
1. Follow the safety guidelines listed in
.
2. Follow the procedure listed in the
Before working inside your system
3.
Steps
1. Remove the five screws securing the fan cage.
2. Lift the cooling fan cage out of the chassis.
Installing and removing enclosure components
31
