Figure 20. Installing the system feet
Next steps
1
Place the system upright on a flat, stable surface, and rotate the system feet outward.
2
Follow the procedure listed in
After working inside your system
.
Caster wheels – optional
Removing caster wheels
Prerequisites
1
Follow the safety guidelines listed in
2
Place the system on its side on a flat, stable surface.
Steps
1
Using the Phillips #2 screwdriver, loosen the captive screw that secures the front wheel unit to the base of the system.
2
Push the front wheel unit toward the rear of the system to release the retention hooks, and pull out the front wheel unit.
3
Loosen the screw that secures the back wheel unit to the base of the system.
4
Push the rear wheel unit toward the front of the system to release the retention hooks, and pull out the rear wheel unit.
Installing and removing system components
47