Chassis weight
Table 60. PowerEdge R7525
System configuration
Maximum weight (with all drives/SSDs)
12 x 3.5-inch
36.3 kg (80.02 lb)
8 x 3.5-inch
33.2 kg (73.19 lb)
24 x 2.5-inch
28.6 kg (63.05 lb)
16 x 2.5-inch
26.6 kg (58.64 lb)
8 x 2.5-inch
24.6 kg (54.23 lb)
Processor specifications
Table 61. PowerEdge R7525 processor specifications
Supported processor
Number of processors supported
AMD EPYC 7002 series processor
Two
PSU specifications
The PowerEdge R7525 system supports up to two AC or DC power supply units (PSUs).
WARNING:
Instructions for the qualified electricians only:
System using -(48-60) V DC or 240 V DC power supplies are intended for restricted access locations in accordance with
Articles 110-5, 110-6, 110-11, 110-14, and 110-17 of the National Electrical Code, American National Standards Institute
(ANSI)/National Fire Protection Association (NFPA) 70.
240 V DC power supplies shall be connected to the 240 V DC outlet from certified power distribution units if applicable
in country of use.
Power supply cords/jumper cords and the associated plugs/inlets/connectors shall have appropriate electrical ratings
referencing the rating label on the system when used for connection.
Table 62. PowerEdge R7525 PSU specifications
PSU
Class
Heat dissipation
(maximum)
Frequency
Voltage
Current
800 W Mixed Mode
AC/HVDC
Platinum
3000 BTU/hr
50/60 Hz
100 -240 V AC
9.2 - 4.7 A
800 W Mixed Mode
AC/HVDC
N/A
3000 BTU/hr
DC
240 V DC
3.8 A
1400 W Mixed
Mode AC/HVDC
Platinum
5250 BTU/hr
50/60 Hz
100 -240 V AC
12 - 8 A
1400 W Mixed
Mode AC/HVDC
N/A
5250 BTU/hr
DC
240 V DC
6.6 A
2400 W Mixed
Mode AC/HVDC
Platinum
9000 BTU/hr
50/60 Hz
100 -240 V AC
16-13.5 A
2400 W Mixed
Mode AC/HVDC
N/A
9000 BTU/hr
DC
240 V DC
11.2 A
NOTE:
If a system with AC 1400 W PSU operate at low line 100-120 V AC, then the power rating per PSU is derated to
1050 W.
186
Technical specifications