Installing the front bezel
The procedure to install the front bezel with and without the LCD panel is the same.
Prerequisite
Follow the safety guidelines listed in
Steps
1
Locate and remove the bezel key.
NOTE:
The bezel key is part of the LCD bezel package.
2
Align and insert the tabs on the bezel into the slots on the system.
3
Press the bezel until the button clicks in place.
4
Lock the bezel by using the key.
Figure 18. Installing the front bezel with the LCD panel
System cover
Removing the system cover
Prerequisites
1
Follow the safety guidelines listed in
2
Turn off the system, including any attached peripherals.
3
Disconnect the system from the electrical outlet and disconnect the peripherals.
Steps
1
Using a 1/4 inch flat head or a Phillips #2 screwdriver, rotate the latch release lock counter clockwise to the unlocked position.
2
Lift the latch till the system cover slides back and the tabs on the system cover disengage from the guide slots on the system.
3
Hold the cover on both sides, and lift the cover away from the system.
Installing and removing system components
63
