Figure 57. Installing the optional IDSDM or vFlash card
Next steps
1
NOTE:
Reinstall the MicroSD cards into the same slots that are based on the labels you had marked on the cards during
removal.
2
3
Follow the procedure that is listed in
After working inside your system
.
Removing the MicroSD card
Prerequisites
1
Follow the safety guidelines listed in the
2
Follow the procedure listed in the
Before working inside your system
3
4
Remove the IDSDM or vFlash module.
Steps
1
Locate the MicroSD card slot on the vFlash/IDSDM module, and press the card to partially release it from the slot. To locate IDSDM/
vFlash module, see the
System board jumpers and connectors
section.
2
Hold the MicroSD card and remove it from the slot.
NOTE:
Temporarily label each MicroSD card with its corresponding slot number after removal.
86
Installing and removing system components