Removing a processor blank and DIMM blank
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE:
You must remove processor blank and DIMM blank when installing four processors or service other components inside
the system.
1
Follow the safety guidelines listed in the Safety instructions section.
2
Follow the procedure listed in the Before working inside your system section.
3
Remove the cooling shroud.
Steps
Hold the processor blank and DIMM blank by its edges and lift it away from the system.
Figure 31. Removing a processor blank and DIMM blank
1
processor blank and DIMM blank
2
memory module socket (2)
Next steps
1
Install the processor and the heat sink.
2
Install the cooling shroud.
3
If you are removing a processor permanently, install the processor blank and DIMM blank.
4
Follow the procedure listed in the After working inside your system section.
Installing and removing sled components
85
