Steps
1. Align the screw holes on the heat sink with the screw holes on the system board.
2. In sequential order (as indicated by the numbers on the heat sink), replace the screws that secure the heat sink to the system board.
•
Heat sink for system boards with integrated graphics card: four screws (M2.5x6)
•
Heat sink for system boards with discrete graphics card: six screws (M2.5x6)
Next steps
1. Install the
2. Install the
.
3. Follow the procedure in
After working inside your computer
.
I/O board
Removing the I/O board
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
3. Remove the
.
About this task
The following image indicates the location of the I/O board and provides a visual representation of the removal procedure.
Disassembly and reassembly
37
Summary of Contents for P92F
Page 40: ...40 Disassembly and reassembly ...
Page 42: ...42 Disassembly and reassembly ...
Page 48: ...48 Disassembly and reassembly ...
